Jump to content
stevecim

Scanning multiple vlans

Recommended Posts

Hi All

I new to Labtech :)   , so sorry in advance if I'm missing a basic step :)

I have a client , they has a small network 90 odd devices , 3 vlans , one for data and 1 for device management and 1 for guest internet access 

All PC/servers/printers/..  live on a 192.168.0.0/24  network,  Switches and Wifi APs , about 25 devices , all sit on a management vlan 192.168.111.0/24. I setup a probe on one of the server, it's a version 2 probe, after enabling it, I then go to Network Probe -> Setting add the 192.168.111.0/255.255.255.0 network , the probe never finds devices in the 192.168.111.0 network.  From the server the probe is running on , I can ping very active device in the 192.168.111.0/24 network, I've tried moving the Network Probe to different servers , always the same results , it never finds any devices in the 192.168.111.0/24 network.   
Where do I start :)

Cheers, Stephen
 

Share this post


Link to post
Share on other sites

The new probe requires a MAC address for it to interact/monitor a device so it will not work across vlan's I am being told.  Hopefully that changes at some point.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×